Virutex AG98E Hot Air Edgebander For Tapes: Portable Edging 5200399

Applications

• Pre-glued PVC, polyester, melamine, and wood veneer edging on external panels
• Internal edging on grooves, door panels, and jamb cut-outs
• Straight, curved, and shaped panel edgebanding
• Circular pieces with minimum 20mm internal radius
• On-site installation and workshop fabrication

Specifications

Construction & Performance

• Lap banding guide registers against internal panel surfaces to keep tape aligned on grooves, door cut-outs, and jamb openings where the standard board tracking system has no reference edge to follow.
• Integrated board tracking system maintains tape alignment on external edges and curved profiles the same way as the AG98F.
• Rubber clamp guidance stabilizes the tool against the panel during application on both internal and external surfaces.
• 1,500W at 400 L/min delivers consistent heat across the full 50mm tape width for reliable pre-glued adhesive activation.
• Two temperature settings at 300°C and 525°C cover the sensitivity range of standard pre-glued edging tapes without continuous adjustment.
• 20mm minimum internal radius handles tight curved cut-outs and shaped openings in door panels.
• Under 1-minute setup with no compressed air or glue pot required.

Why the AG98E

• Lap banding guide is the sole differentiator from the AG98F and a meaningful one — internal edge work on doors and jambs requires a reference surface the standard tracking system cannot use.
• Covers both external and internal edging from one tool, eliminating the need for separate equipment on jobs that include both panel types.
• All other capabilities match the AG98F, so the choice between them comes down to whether internal edge work is required.