Virutex AG98R Hand-Held Hot Air Edgebander For Tapes (120V) 5200499

Applications

• Pre-glued PVC, polyester, melamine, and wood veneer roll edging
• Thicker pre-cut strip edging up to 3mm
• Straight, curved, and shaped panel edgebanding
• Circular components with minimum 20mm internal radius
• On-site installation and workshop fabrication

Specifications

Construction & Performance

• Dual tape feeding system switches between roll-fed edging and manually fed pre-cut strips without a tool change, covering both standard production tape and thicker specialty edging in one machine.
• 3mm strip thickness capacity extends hand-held edgebanding to solid wood strips and thicker PVC profiles that roll-only machines cannot handle.
• Rubber clamp guidance system tracks the tape along the panel edge consistently on straight runs and curves down to 20mm internal radius.
• 1,500W at 400 L/min activates pre-glued adhesive evenly across the full tape width at both 300°C and 525°C settings.
• Under 1-minute setup with no compressed air or glue pot required.
• 2.8kg build keeps the tool manageable across extended banding sessions despite the added dual-feed mechanism.

Why the AG98R

• Dual feed is the sole meaningful differentiator from the AG98F — it matters specifically when pre-cut strips or tape thicker than 1mm are part of the workflow.
• 3mm capacity covers solid wood edging and thick PVC profiles that no other hand-held in the AG98 lineup can accept.
• Handling both formats from one tool reduces the need to stock or transport a second edgebander for mixed-material jobs.
• All other performance characteristics match the AG98F, so the selection between them is straightforward based on tape format requirements.