California Air Tools 10020DCAD 2 HP 10 Gallon Oil-Free Air Compressor with 80% Air Dryer & Auto Drain

The California Air Tools 10020DCAD is a 10 gallon air compressor designed for applications where lower moisture levels and reduced operating noise are beneficial. This model integrates an oil-free dual piston compressor with an aftercooler and desiccant drying system that helps remove a large portion of moisture from compressed air before it reaches connected equipment.

California Air Tools designs compressors that operate at lower rotational speeds compared with many conventional shop compressors. The 10020DCAD uses a SP-series 2 horsepower motor running at approximately 1680 RPM. Lower motor speeds help reduce operating noise and mechanical wear while maintaining consistent airflow for pneumatic tools and shop equipment.

The air treatment system combines an aftercooler with a desiccant drying cartridge containing activated alumina material. The aftercooler reduces discharge air temperature and condenses moisture, while the desiccant stage removes remaining water vapor from the compressed air stream.

An EZ-1 automatic drain valve is installed at the factory to periodically release moisture collected in the air tank. The timed drain cycle helps reduce manual maintenance and supports consistent compressor operation during extended use.

The compressor stores air in a horizontal 10 gallon steel tank designed for stability and space-efficient placement under workbenches or equipment tables. A wheel kit allows the unit to be moved easily within a workshop or jobsite environment.

Standard Equipment

• Oil-free dual piston compressor pump
• SP-series 2 HP compressor motor
• Integrated aftercooler
• Desiccant air dryer with activated alumina cartridge
• 0.01 micron prefilter
• 5 micron air filter and regulator assembly
• Dual pressure control gauges
• Industrial push-to-connect air outlet
• EZ-1 automatic drain valve
• Easy Start Valve
• Thermal overload protection
• Two intake air filters
• Wheel kit

Technical Specifications

• Motor Power: 2.0 HP
• Motor Speed: ~1680 RPM
• Noise Level: 70 dB
• Maximum Pressure: 125 PSI
• Working Pressure Range: 95 – 125 PSI
• Voltage: 110V / 60Hz / Single Phase
• Amperage Draw: 14 Amps
• Tank Capacity: 10 Gallons
• Tank Orientation: Horizontal
• Tank Material: Steel
• Tank Fill Time: ~130 seconds
• Recovery Time: ~40 seconds (95 PSI – 125 PSI)
• Duty Cycle: 70 / 30
• Dimensions: 16" L x 23" W x 35" H
• Weight: 92 lbs
• Air Treatment: Aftercooler and desiccant drying system
• Tank Type: Non-ASME
• Assembly Location: United States with global components