California Air Tools 15020C-22060 2 HP 15 Gallon Oil-Free Air Compressor

The California Air Tools 15020C-22060 is a 220-volt air compressor designed for workshops, fabrication areas, and service environments that require dependable compressed air with reduced operating noise. The system combines an oil-free dual piston compressor with a large 15 gallon storage tank to support pneumatic tools and shop equipment.

California Air Tools builds compressors using lower rotational motor speeds compared with many traditional shop compressors. This model uses a SP-series 2 horsepower motor operating at approximately 1680 RPM. Lower operating speed helps reduce vibration, mechanical wear, and overall noise output while maintaining steady airflow.

The compressor pump uses an oil-free dual piston design that eliminates the need for pump lubrication. Oil-free operation helps reduce routine maintenance requirements and prevents oil from entering the compressed air stream.

An Easy Start Valve is incorporated to assist during startup conditions. By briefly releasing compressed air from the pump head during startup, the compressor reduces the initial load placed on the motor and helps improve starting reliability.

Compressed air is stored in a horizontal 15 gallon steel tank designed to provide additional reserve capacity compared with smaller portable compressors. A wheel kit allows the unit to be repositioned easily around a workshop or jobsite.

Standard Equipment

• Oil-free dual piston compressor pump
• SP-series 2 HP compressor motor
• 15 gallon steel air tank
• Dual pressure control gauges
• Industrial push-to-connect air outlet
• Adjustable pressure regulator
• Easy Start Valve
• Condor pressure switch
• Thermal overload protection
• Aftercooler (condenser)
• Integrated air drying system with activated alumina desiccant
• Two intake air filters
• Wheel kit

Technical Specifications

• Motor Power: 2.0 HP
• Motor Speed: ~1680 RPM
• Noise Level: 70 dB
• Maximum Pressure: 130 PSI
• Voltage: 220V / 60Hz / Single Phase
• Operating Voltage Requirement: 220V only (208V requires booster)
• Amperage Draw: 7.5 Amps
• Tank Capacity: 15 Gallons
• Tank Orientation: Horizontal
• Tank Material: Steel
• Tank Fill Time: ~230 seconds
• Recovery Time: ~50 seconds (100 PSI – 130 PSI)
• Duty Cycle: 70 / 30
• Dimensions: 28" L x 17" W x 30" H
• Weight: 90 lbs
• Air Treatment: Aftercooler and desiccant air dryer
• Tank Type: Non-ASME
• Assembly Location: United States with global components