California Air Tools 10020HDCADC-22060 2 HP 10 Gallon Oil-Free Air Compressor with Air Dryer & Automatic Drain (220V)

The California Air Tools 10020HDCADC-22060 is a 220-volt industrial air compressor designed for applications where moisture control and low operating noise are important. This model combines a dual-piston oil-free compressor system with an integrated aftercooler and desiccant drying assembly to reduce moisture content in compressed air before it reaches downstream equipment.

Manufactured by California Air Tools, a company known for low-RPM compressor designs, this unit uses a SP-9421 motor operating at approximately 1680 RPM. Lower motor speeds help decrease operating noise while reducing mechanical wear on internal components.

The integrated air drying system uses an aftercooler along with a spin-on desiccant cartridge filled with molecular sieve material. This system helps remove a significant portion of water vapor from the compressed air stream, supporting applications where drier air may be required for equipment protection or finishing processes.

An EZ-1 automatic drain valve is installed at the factory to periodically discharge condensation from the air tank. The timed drain system reduces the need for manual draining and helps maintain consistent tank conditions during operation.

The compressor stores air in a horizontal 10 gallon steel tank designed for stability and compact placement under benches or shelving. A wheel kit allows the unit to be repositioned around the shop when needed.

Standard Equipment

• Oil-free dual piston compressor pump
• SP-9421 2 HP compressor motor
• Integrated aftercooler and air drying system
• Spin-on molecular sieve desiccant dryer cartridge
• 0.01 micron prefilter
• 5 micron air filter and regulator assembly
• Dual pressure control gauges
• Industrial push-to-connect air outlet
• EZ-1 automatic drain valve
• Easy Start Valve
• Thermal overload protection
• Two intake air filters
• Wheel kit

Technical Specifications

• Motor Power: 2.0 HP
• Motor Model: SP-9421
• Motor Speed: ~1680 RPM
• Noise Level: 70 dB
• Maximum Pressure: 130 PSI
• Working Pressure Range: 100 – 130 PSI
• Voltage: 220V / 60Hz / Single Phase
• Operating Voltage Range: 215 – 250 VAC
• Amperage Draw: 7.5 Amps
• Minimum Generator Requirement: ~3000 Running Watts
• Tank Capacity: 10 Gallons
• Tank Orientation: Horizontal
• Tank Material: Steel
• Tank Fill Time: ~120 seconds
• Recovery Time: ~25 seconds (95 PSI – 125 PSI)
• Duty Cycle: 70 / 30
• Dimensions: 20" L x 28" W x 26" H
• Weight: 100 lbs
• Air Treatment: Aftercooler and desiccant air dryer system
• Tank Type: Non-ASME
• Assembly Location: United States with global components